Keep Warm During the Winter With Residential Furnace Service

Cold weather can be extremely difficult to live with, which is why so many people invest in quality heating systems. The variety of heating appliances range from wall mounted radiant systems to large HVAC (heating, ventilation, and air conditioning) units. Alternatives include the heat pump and the split or ductless AC. In spite of their names, these latter two appliances work well for both cooling and heating a building. However, every comfort system in use will require some sort of service. In fact, Residential Furnace Service should be performed on any central heating system every year. Manufacturers recommend that the furnace is cleaned and serviced in the late fall or early winter before the appliance is put into use.

The typical furnace operates several months each year, and this is one reason that they get dirty. Dust and dirt can affect a variety of components, but the ones that bear the brunt are electronics. Electronic devices such as capacitors and transistors generate heat. Dust, dirt, and grime prevent this heat from dissipating, which causes electronic components to fail prematurely. Residential Furnace Service can avoid this issue by cleaning the appliance and testing the electronic systems for weak or damaged components.

Systems such as the HVAC operate all year, and this can cause some problems. Most HVAC units have the combustion chamber near the air exchanger. This proximity allows dust to collect inside this chamber. Normally, the accumulation of dust might not be a big deal, but the dust that piles up inside a furnace can be flammable. Annual cleaning ensures that the combustion chamber is free of dust and ready to combat the winter cold. Another reason to consider furnace service is the ignition system. Furnaces have two possible sources of ignition. The first is the pilot light, but many new models rely on an electronic ignition to start the flame.

Unfortunately, no amount of service or repair can keep a furnace functioning forever. Once this appliance fails it is usually time for a new one. One reason for this is that metal degrades as it repeatedly heats and cools. This allows corrosion to occur, especially if the furnace is part of an HVAC. The AC portion of the HVAC can generate condensation, and this moisture can speed up the damaging effects of corrosion. Get more details about furnace service from the experts at Lavergneplumbing.com.

Leave a Reply

Your email address will not be published. Required fields are marked *

five × 2 =