Eliminate the Indoor Chill Using Heating Systems in New Braunfels

by | Jan 13, 2016 | HVAC Contractor

Search

Latest Articles

Categories

Archives

Heating a home is one of the most important functions in winter and there are a variety of ways to handle this problem. For instance, the homeowner may opt for radiant heating, a split or ductless heating system or the more common forced air furnace. The latter is the option of choice for new construction, manufactured housing and most apartments. In fact, more homes are heated by central heat than many people realize. One reason for this is that many Heating Systems in New Braunfels are part of an HVAC (Heating, Ventilation and Air Conditioning) appliance. That is, the portion of the HVAC used to create heat is a furnace just like the standalone models used in central heating solutions.

One way to avoid too many heating failures is to make sure the appliance receives regular maintenance. Routine service is necessary for inspecting the system and eliminating small problems that might develop into full-scale failure. Consider the interior of the forced air system. This appliance creates heat in one area that is transferred through the air exchanger for release throughout the building. However, the system needs to know when enough heat has been collected to turn on the blower. This implies one or more sensors and any switches necessary for cycling the system. At least one of these sensors should shut down the heat generation as well.

Not all Heating Systems in New Braunfels work the same way. Central heating and HVAC systems use a blower to force the heated air throughout the building. Alternatives such as under-floor heating or baseboard units use radiant heat. This type of heating slowly fills a room with warmth and may be more efficient in certain applications. The drawback to using radiant heat is the extra time it takes to heat the whole area. This can be avoided by leaving the heating system on a low setting, but it could cause safety concerns if the appliance is too old.

Another option is the ductless comfort appliance. This device gets its name from the fact that no air is moved through ducts. Instead, the system uses one or more blowers in various rooms. The split system works in the winter by reversing the cooling procedure. This allows the system to collect heat from outside the building for use indoors. Get more information by contacting the experts at All Service Air Conditioning & Heating Inc. Or their Facebook page.

Related Articles