HVAC System Energy Operations and Help From Commercial Heating And AC Repair Experts in Centerville, OH

by | Mar 16, 2017 | Heating and Air Conditioning

Search

Latest Articles

Categories

Archives

A large portion of a commercial business’s energy use comes from heating and cooling the building. On average, 15% of the energy used comes from space cooling alone. As if the HVAC (Heating, Ventilating, and Air Conditioning) system did not use enough energy on its own, the U.S. Department of Energy estimates that 30% of the used power is wasted in a commercial building. Wasted energy highly increases the cost for a company in operation. So the question is, how can commercial buildings cut back on wasted energy and ensure their HVAC system is running as efficiently as possible? Take these few simple steps to increase the efficiency of your cooling and heating system.

Use Programmable Thermostats

Programmable thermostats are a simple and fast way to save a load of money in commercial buildings. It can be programmed to a certain temperature during the day and switch once the business closes. For example, during the winter you could turn the heat up during working hours, then back down overnight to save energy.

Schedule RregularQquality Maintenance

Getting your HVAC system the occasional tune-up will greatly benefit your company’s energy take as well. If a qualified HVAC technician operates on your system, it could reduce costs by 40%. This will check that your equipment is still working properly from faulty or aging equipment. If your system is only checked annually, the company may run the faulty equipment for months without noticing a problem. This will result in a higher bill and a lot of wasted energy. Contact Commercial Heating And AC Repair Experts in Centerville OH to schedule a checkup.

Verify Equipment is Operating Properly

This includes air-side economizers, heating and cooling valves, and air dampers. Air dampers should fully open and close. If you are currently using air-side economizer, the outside air flow rates and damper position may be used to text properly functioning equipment. Malfunctioning heating and cooling valves may cause unnecessary heating and cooling. This equipment should be tested by an HVAC professional.

Installing a new HVAC system can greatly benefit your company by saving energy, causing an overall lower bill for the entire year. Make sure to get regular maintenance checkups to ensure you have properly functioning equipment. Visit Peck Service to find commercial heating and AC repair experts in Centerville, OH so you can ask about proper equipment installation.

Related Articles